TM Italia presents a special project for the Staffoni Arredamenti's Showroom: an important composition with double island and columns with retractable pocket doors, with a Rovere Materico Bruno oak snack-bar surmounting the two Pietra di Corinto stone worktops.
The wide kitchen project created by TM Italia covers a surface of 33 square meters on a linear layout with double island and columns.
The column side is divided into two distinct compositions, both made on the G180 concept with outside handle and finishing of the external doors in Rovere Materico bruno oak veneer with vertical grain.
On one side an oven columns, on the other a columns with retractable pocket doors that conceal an operating area. Inside, the equipped column continues in the shades of the kitchen: internal wall units and bases are realized ok K6 model in a special lacquered Bronzo Scuro satinato finish. The worktop and the backsplash inside the retractable pocket doors are in Acciaio Inox satinato stainless steel that offer a unique and modern aesthetic, which winks at the industrial style.
The two central islands are connected by a snack bar in Rovere Materico bruno: a link between the two monolithic shapes that gives harmony to the entire composition.
The island on the left is composed by an operational area realized on G180 model with inside handle, in Acciaio Inox satinato stainless steel. The opposite side is designed on D90 concept with push&pull opening. The worktop is in Pietra di Corinto brullata stone with integrated sink, filotop induction hob with built in extractor and a vertically extractable pantry.
On the right side, the operational area of the island is designed on the T45 concept. The opposite side is realized on D90 model with push&pull opening. Doors and worktop are both in Pietra di Corinto brullata stone. The worktop is featured with filotop induction hop and a vertically extractable hood.
Both islands also featured back-lid drawers with electrified opening, for maximum usability.
T45 is a modular kitchen system. Doors and fronts may be 22 mm or 28 mm thick.
∙ T45: doors and fronts have an edge with an inclination of 45° which, sticking out of the structure, creates an opening grip. The remaining edges are straight.
∙ T45 Evo: doors and fronts have an edge with an inclination of 45° which stick out of the structure and is in contact with the worktop.
The wall units of this concept are provided with a grip handle recessed on the bottom structural panel.
